 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MBR0530T1/D Surface Mount Schottky Power Rectifier Plastic SOD-123 Package . . . using the Schottky Barrier principle with a large area metal-to-silicon power diode. Ideally suited for low voltage, high frequency rectification or as free wheeling and polarity protection diodes in surface mount applications where compact size and weight are critical to the system. This package also provides an easy to work with alternative to leadless 34 package style. These state-of-the-art devices have the following features: * Guardring for Stress Protection * Low Forward Voltage * 125C Operating Junction Temperature * Epoxy Meets UL94, VO at 1/8 * Package Designed for Optimal Automated Board Assembly MBR0530T1 MBR0530T3 Motorola Preferred Devices SCHOTTKY BARRIER RECTIFIER 0.5 AMPERES 30 VOLTS Mechanical Characteristics * Reel Options: MBR0530T1 = 3,000 per 7 reel/8 mm tape Reel Options: MBR0530T3 = 10,000 per 13 reel/8 mm tape * Device Marking: B3 * Polarity Designator: Cathode Band * Weight: 11.7 mg (approximately) * Case: Epoxy, Molded * Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable * Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR) TL = 100C Non-repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Storage Temperature Operating Junction Temperature Voltage Rate of Change (Rated VR) Symbol VRRM VRWM VR IF(AV) IFSM Tstg TJ dv/dt Value 30 CASE 425-04 SOD-123 Unit Volts 0.5 5.5 - 65 to +125 - 65 to +125 1000 Amps Amps C C V/s THERMAL CHARACTERISTICS Thermal Resistance -- Junction to Ambient (1) Thermal Resistance -- Junction to Lead (1) RJA RJL VF 0.375 0.43 IR 130 20 A 340 150 C/W C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (2) (iF = 0.1 Amps, TJ = 25C) (iF = 0.5 Amps, TJ = 25C) Maximum Instantaneous Reverse Current (2) (Rated dc Voltage, TC = 25C) (VR = 15 V, TC = 25C) Volts (1) FR-4 or FR-5 = 3.5 x 1.5 inches using the Motorola minimum recommended footprint. (2) Pulse Test: Pulse Width = 300 s, Duty Cycle 2%. Preferred devices are Motorola recommended choices for future use and best overall value. Rev 1 (c)RectifierInc. 1996 Data Motorola, Device 1 MBR0530T1 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 104 I R, REVERSE CURRENT ( A) 1 1000 TJ = 125C TJ = 125C 0.1 75C 25C - 40C 100 75C 10 25C 0 5 10 15 20 25 30 35 40 1 0.01 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 VF, INSTANTANEOUS VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current 180 160 C, CAPACITANCE (pF) 140 120 100 80 60 40 20 0 5 10 15 20 25 30 TYPICAL CAPACITANCE AT 0 V = 170 pF VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Capacitance 1 AVERAGE FORWARD CURRENT (AMP) 0.875 0.75 0.625 0.5 0.375 0.25 0.125 0 60 SQUARE WAVE = =5 = 10 Ipk/Iav = 20 67 74 81 88 95 102 109 116 123 130 DC P F(AV), AVERAGE POWER DISSIPATION (WATT) 0.35 0.315 0.28 0.245 0.21 0.175 0.14 0.105 0.07 0.035 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Ipk/Iav = 20 = 10 =5 TJ = 125C = SQUARE WAVE DC LEAD TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMP) Figure 4. Current Derating (Lead) Figure 5. Power Dissipation 2 Rectifier Device Data MBR0530T1 RECOMMENDED FOOTPRINT FOR SOD-123 2.36 0.093 4.19 0.165 SOD-123 Rectifier Device Data EEEE EEEE EEEE EEEE EEEE 0.91 0.036 EEEE EEEE EEEE EEEE EEEE 1.22 0.048 mm inches 3 MBR0530T1 PACKAGE DIMENSIONS A C H K Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 81-3-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 4 AAAA AAAA AAAA 2 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B C D E H J K INCHES MIN MAX 0.055 0.071 0.100 0.112 0.037 0.053 0.020 0.028 0.004 --- 0.000 0.004 --- 0.006 0.140 0.152 MILLIMETERS MIN MAX 1.40 1.80 2.55 2.85 0.95 1.35 0.50 0.70 0.25 --- 0.00 0.10 --- 0.15 3.55 3.85 B E J STYLE 1: PIN 1. CATHODE 2. ANODE D CASE 425-04 ISSUE C PLASTIC CODELINE TO BE PLACED HERE Rectifier Device Data MBR0530T1/D |
Price & Availability of MBR0530T1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |